Edit SIP Trunk
Click the link of the SIP trunk to edit from the Trunks panel.
Edit settings shown on the right side.
Click Save button.
Delete SIP Trunk
Click the link of the SIP trunk to delete from the Trunks panel.
Click Delete button.
The deleted SIP trunk shall disappear from the Trunks panel.
Table 2-6-1 SIP Trunk Configuration Settings
Field
Description
Trunk identifier
A unique number consisting of digits only. Usually give
the phone number issued by the ITSP for consistency.
Description
Arbitrary description info.
Block all calls
Check this to create a dummy blocking trunk. Outbound
calls matching routegroup associated with this trunk will
be blocked.
Dynamic peer
Check if the trunk is a passive trunk which means the
registration will be from a dynamic remote peer. Typical
application is to accept registration from an IP PBX at a
remote site with dynamic IP address. Once the remote
IP PBX registers, calls from local to remote can be made
reversely over the trunk.