DHCP
You may choose DHCP in Type list and click APPLY button, and the acquired IP
address, network mask, and default gateway information will be displayed when you
revisit this page later.
PPPoE
Choose PPPoE in Type list and enter the username and password, then click APPLY
button to save your input. The PPPoE dialing will start right away. When the
connection is active, the page will show the acquired IP address, network mask, and
default gateway information. There will also be a Disconnect button to disconnect
connection when desired. Please ask your ISP if you aren’t sure the Username and
Password.
Checkbox: LAN Only
Check checkbox LAN Only to disable WAN IP setting but allow the configuration of
default gateway and primary/secondary DNS servers.