TCP/IP Tab
Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options
are:
•
Dynamic IP Address
(DHCP) - The IP address is obtained automatically, from a DHCP
Server on your network.
•
Fixed IP Address
- You must enter the IP address, Subnet Mask, and Gateway Address.
•
IP Address
- Select an unused IP address from the address range used on your LAN.
•
Subnet Mask
- Use the same values as PCs on your LAN (or on the same LAN
segment, if you have a Router).
•
Gateway
- Use the same values as PCs on your LAN (or on the same LAN segment, if
you have a Router).
The WPS-0104 LevelOne Wireless Printer Server also supports the Auto-IP function. If the
WPS-0104 LevelOne Wireless Printer Server is set to
Dynamic IP Address
, but there's no
DHCP server found on the network, the WPS-0104 LevelOne Wireless Printer Server will get
an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though
the WPS-0104 LevelOne Wireless Printer Server was initialized with an Auto-IP, it will
change to DHCP whenever a DHCP server is detected.
Figure 21: TCP/IP Screen
The
TCP session
parameters should only be changed if advised to do so by your Network
Administrator or Print Server Technical Support.
Page 29
