Windows 9x/ME Setup
Before performing the following procedure, the WPS-0104 LevelOne Wireless Printer Server
must be installed on your LAN, and configured as described in Chapter 3. Both the WPS-0104
LevelOne Wireless Printer Server and the attached printer should be powered ON.
1. Insert the supplied CD-ROM into your drive. If the setup program does not start, run
SETUP.exe in the root folder.
2. Click
Installation
button, then select the
User Install
.
Figure 9: Installation Screen
3. Follow the prompts to complete the installation of the Peer-to-peer Printer Port Driver.
(Refer to the
Windows
section of
Chapter 8 - Troubleshooting
if there is a problem with
the installation.)
4. The
Print Driver Setup
will then run.
In future, you can use
Start
-
Programs
-
PrintServer Driver
-
Printer Port Setup
to run the
program again.
PTP Printer Port Setup
1. The program will search for Printer Servers on the network, and a screen like the
following will be displayed.
•
If desired, click
Refresh
.
•
The name of the attached printer will be displayed if possible. If "No printer" is
displayed, check that the printer is properly connected and powered on.
Page 15
