Front Panel LEDs
Power
On
- Normal operation.
Off
- No power
HomePlug
On
- The Powerline network is active. This means that at least one other HomePlug device
was detected.
Off
- Powerline network is not available - no other HomePlug devices were detected.
Flashing
- Data is being transmitted or received via the Powerline network.
* The initial HomePlug device connects to the Powerline is called CO (Coordinator) CO
’s
LED will illuminate under all circumstance.
Ethernet
On
- Ethernet connection is active.
Off
- No Ethernet connection.
Flashing
- Data is being transmitted or received via the Ethernet Port.
Security
This button is designed to generate an individual network group under multiple nods (PLI-
2030) environment.
Please refer to
Security Button
section for more details.
Reset
This button is used to clear ALL data and restore ALL settings to the factory default values.
Press and release the reset button to begin restore factory default.
Rear Panel
The rear panel contains only the AC plug and a sticker containing the 200Mbps
HomePlug AV Ethernet Bridge’s
Password
. (Each HomePlug device contains a unique Password.)
