3.2. Connecting Network Cable
The Switch supports 48-port 10Mbps Ethernet or 100Mbps
Fast Ethernet and it runs both in half and full duplex mode
using two pair of Category 5 cable.
The Switch also supports 4-port 1000Mbps Gigabit Ethernet
that runs in Auto-negotiation mode and 10Mbps Ethernet or
100Mbps Fast Ethernet that runs both in half and full duplex
mode and 1000Mbps Gigabit Ethernet runs in full duplex mode
using four pair of Category 5 Cable.
These RJ45 ports are Auto-MDI type port. The Switch can auto
transform to MDI-II or MDI-X type, so you can just make an
easy connection that without worrying if you are using a
standard or crossover RJ45 cable.
There are additional 2 ports mini-GBIC slot for optional
mini-GBIC module.
3.3. AC Power
The Switch used the AC power supply 100-240V AC, 50-60 Hz.
The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The switch’s
power supply will adjust to the local power source automatically
and may be turned on without having any or all LAN segment
cables connected.
13
