2. HARDWARE DESCRIPTION
2.1. Front Panel
LED Indicators:
Comprehensive LED indicators display the status of the switch
and the network (see the LED Indicators chapter below).
100BASE-TX Fast Ethernet Ports (Port 1~48):
These ports support network speeds of either 10Mbps or
100Mbps, and can operate in half- and full- duplex transfer
modes. These ports also supports automatic MDI/MDIX
crossover detection function gives true “plug and play”
capability, just need to plug-in the network cable to the hub
directly and don’t care if the end node is NIC (Network
Interface Card) or switch and hub.
Combo mini-GBIC Ports (Port 49~50)
The Switch is equipped with two combo mini-GBIC ports,
supported optional 1000BASE-SX/LX mini-GBIC module.
The 1000BASE-T port 49 and 50 are the same ports with the
mini-GBIC port 49 and 50, when plug in the mini-GBIC module,
the device will activate mini-GBIC, and the RJ45 port will be
disabled.
1000BASE-T Gigabit Ethernet Ports (Port 49~52):
The Switch four Gigabit twisted pair ports, supported auto
negotiable 10/100/1000Mbps and auto MDI/MDIX crossover
detection function, this function gives true “plug and play”
capability, just need to plug-in the network cable to the hub
directly and don’t care if the end node is NIC (Network
Interface Card) or switch and hub. These ports can operate in
half-duplex mode for 10/100Mbps and full- duplex mode for
10/100/1000Mbps.
5
