LevelOne GSW-2692, Руководство по установке

Страница: 17 / 64

Description of Hardware
1-5
1
Figure 1-4 System LEDs
Table 1-2 System Status LEDs
LED Condition Status
PWR On Green The unit’s internal power supply is operating normally.
On Amber The unit’s internal power supply has failed.
Off The unit has no power connected.
Diag On Green The system diagnostic test has completed successfully.
Flashing Green The system diagnostic test is in progress.
On Amber The system diagnostic test has detected a fault.
RPU Green A redundant power unit is attached and is in backup or
active mode.
Amber There is a fault in the redundant power unit.
Off There is no redundant power unit currently attached.
Stack Master Flashing Amber An initial power-on state during which the stack
configuration is detected.
Green This switch is acting as the Master unit in the stack.
Amber This switch is acting as a Slave unit in the stack.
PWR
Diag
RPU
28/Up
26
o n e
level
®
GSW-2692
System LEDs