28
2.4.6.Saving or Restoring the System Configuration
Use the Configuration File menu to save the switch configuration settings to a file on a
TFTP client. The file can be later downloaded to the switch to restore the switch’s
settings. The success of the operation depends on the accessibility of the TFTP client
and the quality of the network connection. Parameters shown on this screen are
indicated in the following figure and table.
Configuration File
======================
Station IP :0.0.0.0
Operation :Download from switch
<START> <Cancel>
IP address of the TFTP client. |
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Station IP IP address of a PC running TFTP client software.
Operation Download from switch – Downloads the current switch configuration to a file
on the client PC.
Upload to switch – Uploads a configuration file to the switch from the client
PC.
Note:
Saving and restoring switch configuration settings can then be initiated by using
any TFTP client utility, such as the command line utility included in Windows NT.
For example, using Windows NT, from a DOS window command prompt, enter
the TFTP command in the form:
TFTP [-i] host [GET : PUT] source [destination]
To transfer a file –
Switch:
Specify the IP address of the TFTP client, and select “Download from
switch” or “Upload from Switch.”
TFTP Client:
Set the mode to <binary>, specify the IP address of the target switch
and the directory path / name of the file to transfer.
Switch:
Select <START> from the Configuration File menu.
TFTP Client:
Start transferring the configuration file from the TFTP client or the
switch, and wait until the transfer completes.
