LevelOne GEP-1070 Скачать руководство пользователя страница 99

Страница: 99 / 319

Any)

■

TCP SYN

– Specifies the TCP “Synchronize sequence numbers” (SYN) value for this

rule. (Options: Any - any value is allowed, 0 - TCP frames where the SYN field is set must

not match this entry, 1 -TCP frames where the SYN field is set must match this entry;

Default: Any)

■

TCP RST

– Specifies the TCP “Reset the connection” (RST) value for this rule. (Options:

Any - any value is allowed, 0 - TCP frames where the RST field is set must not match this

entry, 1 - TCP frames where the RST field is set must match this entry; Default: Any)

■

TCP PSH

– Specifies the TCP “Push Function” (PSH) value for this rule. (Options: Any -

any value is allowed, 0 -TCP frames where the PSH field is set must not match this entry, 1

-TCP frames where the PSH field is set must match this entry; Default: Any)

■

TCP ACK

– Specifies the TCP “Acknowledgment field significant” (ACK) value for this

rule. (Options: Any - any value is allowed, 0 - TCP frames where the ACK field is set must

not match this entry, 1 -TCP frames where the ACK field is set must match this entry;

Default: Any)

■

TCP URG

– Specifies the TCP “Urgent Pointer field significant” (URG) value for this rule.

(Options: Any - any value is allowed, 0 - TCP frames where the URG field is set must not

match this entry, 1 - TCP frames where the URG field is set must match this entry; Default:

Any)

■

IP TTL

– Specifies the time-to-Live settings for this rule. (Options: Any - any value is

allowed, Non-zero - IPv4 frames with a TTL field greater than zero must match this entry,

Zero -IPv4 frames with a TTL field greater than zero must not match this entry; Default:

Any)

■

IP Fragment

– Specifies the fragment offset settings for this rule. This involves the

settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field

for an IPv4 frame. (Options: Any - any value is allowed, Yes - IPv4 frames where the MF

bit is set or the FRAG OFFSET field is greater than zero must match this entry, No -IPv4

frames where the MF bit is set or the FRAG OFFSET field is greater than zero must not

match this entry; Default: Any)

■

IP Option

– Specifies the options flag setting for this rule. (Options: Any - any value is

allowed, Yes - IPv4 frames where the options flag is set must match this entry, No -IPv4

frames where the options flag is set must not match this entry; Default: Any)

■

SIP Filter

– Specifies the source IP filter for this rule. (Options: Any - no source IP filter is

specified, Host - specifies the source IP address in the SIP Address field, Network -

specifies the source IP address and source IP mask in the SIP Address and SIP Mask

fields; Default: Any)

■

DIP Filter

– Specifies the destination IP filter for this rule. (Options: Any - no destination

IP filter is specified, Host - specifies the destination IP address in the DIP Address field,

Network - specifies the destination IP address and destination IP mask in the DIP Address

and DIP Mask fields; Default: Any)

Response to take when a rule is matched

Содержание GEP-1070
































































































































































































































































































































Результаты поиска

Содержание GEP-1070

Отзывы:

LevelOne GEP-1070, Руководство пользователя, Страница: 99 / 319

Результаты поиска

Содержание GEP-1070

Отзывы: