LevelOne GEP-1070 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 319

LevelOne GEP-1070 Скачать руководство пользователя страница 3

3

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause interference, in which case the user, at his or her own expense

will be required to take whatever measures to correct the interference.

FCC Caution

To assure continued compliance (example-use only shielded

interface cables when connection to computer or peripheral devices). Any

changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment. This device complies with Part 15 of the FCC

Rules. Operation is subject to the Following two conditions: (1) This

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

CE Warning

This is a Class A device, In a residential environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.

RELATED PUBLICATIONS

The following publication details the hardware features of the switch, including the physical and
performance-related characteristics, and how to install the switch:

The Installation Guide

As part of the switch’s software, there is an online web-based help that describes all

management related features.

Information  furnished  by  Yoda  Communications,  Inc.  is  believed  to  be  accurate  and  reliable.
However,  no  responsibility  is  assumed  by  Yoda  Communications  for  its  use,  nor  for  any
infringements of patents or other rights of third parties which may result from its use. No license
is granted by implication or otherwise under any patent or patent rights of Yoda Communications.
Yoda Communications reserves the right to change specifications at anytime without notice.

Copyright (C) 2013 by Digital Data Communications Asia Co., Ltd

Taiwan, R.O.C.

All rights reserved.

«
1
2
3
4
5
...
»

Содержание GEP-1070
































































































































































































































































































































Отзывы:

Нет отзывов