LevelOne GEP-1070 Скачать руководство пользователя страница 198

Страница: 198 / 319

198

handling ingress packets based on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or

VLAN priority tag.

Once a QCE is mapped to a port, traffic matching the first entry in the QoS Control List is

assigned to the QoS class, drop precedence level, and DSCP value defined by that entry.

Traffic not matching any of the QCEs are classified to the default QoS Class for the port.

PATH

Configuration \ QoS \ QoS Control List

Figure 86: QoS Control List Configuration

PARAMETERS

These parameters are displayed:

QoS Control List

◆

QCE

– Quality Control Entry index.

◆

Port - Port identifier.

◆

Frame Type

– Indicates the type of frame to look for in incoming

◆

SMAC

–

The OUI field of the source MAC address, i.e. the first three octets (bytes) of the

MAC address.

◆

DMAC

–

The type of destination MAC address. Possible values are: Any, Broadcast,

Multicast, Unicast.

◆

VID

– VLAN identifier. (Range: 1-4095)

◆

Action

– Indicates the classification action taken on ingress frame if the configured

parameters are matched in the frame's content. If a frame matches the QCE, the following

actions will be taken:

■ Class (Classified QoS Class) – If a frame matches the QCE, it will be put in the queue
corresponding to the specified QoS class.

Содержание GEP-1070
































































































































































































































































































































Результаты поиска

Содержание GEP-1070

Отзывы:

LevelOne GEP-1070, Руководство пользователя, Страница: 198 / 319

Результаты поиска

Содержание GEP-1070

Отзывы: