manualshive.com logo in svg

LevelOne GEL-2670, Руководство пользователя, Страница: 282 / 320

Поделиться
Скачать
LevelOne GEL-2670 Скачать руководство пользователя страница 282

C

HAPTER

 5

  |  Monitoring the Switch

Displaying Information About VLANs

–  282  –

Figure 143:  Showing VLAN Members    

VLAN P

ORT

 S

TATUS

Use the VLAN Port Status page to show the VLAN attributes of port 

members for all VLANs configured by a selected software module, including 

PVID, VLAN aware, ingress filtering, frame type, egress filtering, and UVID.

Refer to the preceding section for a description of the software modules 

that use VLAN management services.

P

ATH

 

Monitor, VLANs, VLAN Port

P

ARAMETERS

These parameters are displayed:

◆

VLAN User

 – A software module that uses VLAN management services 

to configure VLAN membership and VLAN port settings such as the 

PVID or untagged VLAN ID. Refer to the preceding section for a 

description of the software modules that use VLAN management 

services.

◆

Port

 – Port Identifier.

◆

PVID

 – The native VLAN assigned to untagged frames entering this 

port.

◆

Port Type

 - Shows whether or not a port processes the VLAN ID in 

ingress frames (Aware or Unaware).
If a port is 

not

 VLAN aware, all frames are assigned to the default VLAN 

(as specified by the Port VLAN ID) and tags are not removed. 
If a port is VLAN aware, each frame is assigned to the VLAN indicated in 

the VLAN tag, and the tag is removed.

◆

Ingress Filtering

 – If ingress filtering is enabled and the ingress port 

is not a member of the classified VLAN of the frame, the frame is 

discarded. 

◆

Frame Type

 – Shows whether the port accepts all frames or only 

tagged frames. If the port only accepts tagged frames, untagged 

frames received on that port are discarded. 

◆

Tx Tag

 – Shows egress filtering frame status, indicating whether 

frames are transmitted as tagged or untagged. 

Содержание GEL-2670

































































































































































































































































































































Отзывы:

Нет отзывов