LevelOne GEL-2670 Скачать руководство пользователя страница 167

Страница: 167 / 320

HAPTER

| Configuring the Switch

Link Layer Discovery Protocol

– 167 –

particular endpoint types (for example only advertise the voice network

policy to permitted voice-capable devices), both in order to conserve

the limited LLDPU space and to reduce security and system integrity

issues that can come with inappropriate knowledge of the network

policy.
With this in mind LLDP-MED defines an LLDP-MED Fast Start interaction

between the protocol and the application layers on top of the protocol,

in order to achieve these related properties. Initially, a Network

Connectivity Device will only transmit LLDP TLVs in an LLDPDU. Only

after an LLDP-MED Endpoint Device is detected, will an LLDP-MED

capable Network Connectivity Device start to advertise LLDP-MED TLVs

in outgoing LLDPDUs on the associated port. The LLDP-MED application

will temporarily speed up the transmission of the LLDPDU to start

within a second, when a new LLDP-MED neighbor has been detected in

order share LLDP-MED information as fast as possible to new

neighbors.
Because there is a risk that a LLDP frame being lost during transmission

between neighbors, it is recommended to repeat the fast start

transmission multiple times to increase the possibility for that the

neighbors has received the LLDP frame. With Fast start repeat count it

is possible to specify the number of times the fast start transmission is

repeated. The recommended value is 4 times, giving that 4 LLDP

frames with a 1 second interval will be transmitted, when a LLDP frame

with new information is received.
It should be noted that LLDP-MED and the LLDP-MED Fast Start

mechanism is only intended to run on links between LLDP-MED

Network Connectivity Devices and Endpoint Devices, and as such does

not apply to links between LAN infrastructure elements, including

between Network Connectivity Devices, or to other types of links.

Coordinates Location

◆

Latitude

– Normalized to within 0-90 degrees with a maximum of 4

digits. It is possible to specify the direction to either North of the

equator or South of the equator.

◆

Longitude

– Normalized to within 0-180 degrees with a maximum of 4

digits. It is possible to specify the direction to either East of the prime

meridian or West of the prime meridian.

◆

Altitude

– Normalized to within -32767 to 32767 with a maximum of 4

digits. It is possible to select between two altitude types (floors or

meters).

■

Meters

: Representing meters of Altitude defined by the vertical

datum specified.

■

Floors

: Representing altitude in a form more relevant in buildings

which have different floor-to-floor dimensions. An altitude = 0.0 is

meaningful even outside a building, and represents ground level at

the given latitude and longitude. Inside a building, 0.0 represents

the floor level associated with ground level at the main entrance.

Содержание GEL-2670

































































































































































































































































































































Результаты поиска

Содержание GEL-2670

Отзывы:

LevelOne GEL-2670, Руководство пользователя, Страница: 167 / 320

Результаты поиска

Содержание GEL-2670

Отзывы: