LevelOne GEL-2670 Скачать руководство пользователя страница 250

Страница: 250 / 320

HAPTER

| Monitoring the Switch

Displaying Information on Authentication Servers

– 250 –

■

Unknown Types

– The number of RADIUS packets of unknown

type that were received from this server on the authentication port.

■

Packets Dropped

– The number of RADIUS packets that were

received from this server on the authentication port and dropped for

some other reason.

◆

Transmit Packets

■

Access Requests

– The number of RADIUS Access-Request

packets sent to this server. This does not include retransmissions.

■

Access Retransmissions

– The number of RADIUS Access-

Request packets retransmitted to this RADIUS authentication

server.

■

Pending Requests

– The number of RADIUS Access-Request

packets destined for the server that have not yet timed out or

received a response. This variable is incremented when an Access-

Request is sent and decremented due to receipt of an Access-

Accept, Access-Reject, Access-Challenge, timeout, or

retransmission.

■

Timeouts

– The number of authentication timeouts to the server.

After a timeout, the client may retry to the same server, send to a

different server, or give up. A retry to the same server is counted as

a retransmit as well as a timeout. A send to a different server is

counted as a Request as well as a timeout.

◆

Other Info

■

IP Address

– IP address and UDP port for the authentication

server.

■

State

– The current state of the server. This field takes one of the

following values:

■

Disabled

– The server is disabled.

■

Not Ready

– The server is enabled, but IP communication is not

yet up and running.

■

Ready

– The server is enabled, IP communication is up and

running, and the RADIUS module is ready to accept access

attempts.

■

Dead

(X seconds left) – Access attempts were made to this

server, but it did not reply within the configured timeout. The

server has been temporarily disabled, but will be re-enabled

when the dead-time expires. The number of seconds left before

this occurs is displayed in parentheses.

■

Round-Trip Time

– The time interval (measured in milliseconds)

between the most recent Access-Reply/Access-Challenge and the

Содержание GEL-2670

































































































































































































































































































































Результаты поиска

Содержание GEL-2670

Отзывы:

LevelOne GEL-2670, Руководство пользователя, Страница: 250 / 320

Результаты поиска

Содержание GEL-2670

Отзывы: