Chapter6
LevelOne FNS-6000 - Maintenance
The LevelOne FNS-6000 has been specially designed to run on 24 hours, 7 days a week and
to be ready at all times. It is also robust to protect against system crashes caused by power
loss. This section provides a general maintenance overview.
Shutdown/Restart the Server
Please use the following steps to shutdown/restart the server:
1. Ask all the connected users to save their working files and stop using the LevelOne
FNS-6000.
2. Open the administration web page and go to
System Tools ·
Restart/Shutdown
. Follow the instructions to restart or shutdown the system.
Reset the Administrator Password & Network
Settings
If you accidentally forget the administrator password, you will not be able to perform any
administration work on the LevelOne FNS-6000. Under this condition, you can reset the
administrator password and network configuration to the factory default.
1. Use the tip of a ball point pen and depress the configuration reset switch located on
the back of the LevelOne FNS-6000. Hold it for about 5 seconds until the beep.
2. The network configuration will be reset, and you may need to re-configure some o
all of the network settings before you can connect to the LevelOne FNS-6000.
3. Use a web browser to connect to the LevelOne FNS-6000. Enter
the
System
Login:
Administrator
Password: admin
You can then perform system administration.
Note
: If the configuration reset switch is disabled in the
System Tools
·
Hardware
Settings
page, you are no longer able to use this function. Please remember your
administrator password.
Disk Failure or Malfunction
If you are suffering from a disk failure or malfunction, please do the following:
1. Log all abnormal events or messages for technician’s reference
2. Stop all operations of the LevelOne FNS-6000 and power it off
43
