1.
Enable LCD panel setting function
Allow you to change the TCP/IP configuration using the LCD panel buttons.
2.
Enable configuration reset switch
Depress and hold on the configuration reset switch for 5 seconds to reset the
administrator password and network settings to the factory default.
3.
Enable hard disk standby mode
Hard disk will go to standby mode if there is no access within the period you specify.
4.
Enable buzzer
If the buzzer is disabled, it will not sound when a system error occurs, but the warning
light will still shine.
•
System Update
Performs system software updates. Make sure that the image file that you are about to
update is the correct version and read through the instructions carefully. It is wise to back
up all existing data on the LevelOne FNS-6000 prior to performing system
software update. The current settings will remain unchanged after the system is upgraded.
•
Change Logo
You can place a picture that you desire on the upper right corner of the home page. The
size of the picture cannot exceed 20K.
28
