Hardware Manual
9
Physical Description
1)
Reset Button
The reset button is used to restore the factory default settings of the camera, including the
administrator
’s password.
To reset the camera, do the following:
a.
Loosen the four (4) screws using the bundled hex screwdriver to remove the cover.
b.
Press and hold the reset button for at least 5 seconds or until the Power LED goes off.
2)
Power LED
The Power LED lights red when the camera is powered up.
3)
Ethernet Port
The Ethernet port connects to a network using a standard Ethernet cable.
4)
AC 24V Power Input
This jack connects to the power adapter and power cord to supply power to the camera.
