Level GB 102 122, Руководство пользователя

Страница: 7 / 28

6
To ensure the GSM gate cooperates with SIM card correctly it is necessary to set
the same PIN number in GB 102 configuration as on the SIM card or set no PIN
code blocking on the SIM.
3.4. Indication by LED
Indication LEDs on GB 102 indicate basic operational states:
PWR– power supply status
Permanently on - Indicates connected power input
GSM –GSM module status
Blinking 0,5 s / 0,5 s - Connecting to the GSM network
Blinking 0,2 s / 2 s - Indicates GSM network connected
Permanently on - Communication in progress
STATUS – phone line status
Permanently on - Line is picked up
Blinking quickly - Dialing
Blinking slowly - Ringing
4. Configuring
Number of functions and parameters, which allow maximum adjustment of gate
GB 102 to environment and user’s requirements, can be set by programming.
Parameter configuration change can be performed using:
Control Panel software connected via serial line from PC
Control Panel software connected via GSM remote access
A regular phone using tone dialing
SMS messages sent from mobile phone
4.1. Configuring gateway from PC
1. Install program Control Panel from CD, which is part of delivery, in your
PC.
2. Connect GB 102 to the computer using serial port and reduction cable,
run the Control Panel software. Choose the used communication port in
Communication Settings.
3. You can read actual configuration from GB 102, edit all parameters and
save configurations on disc.
4. Configuration becomes valid immediately after sending into GB 102. If
change of PIN was part of configuration prove login of GB 102 in network
by switching-off and on.