Level GB 102 122, Руководство пользователя

Страница: 18 / 28

17
Dial Command SMS Command Default
310xy#... TIEENTERx y Not preset from production
Where x is number of position 1 to 5.
Where y is up to 16 digits of enter prefix dial selection.
Result Dial
This is the phone number of the remote PBX which will replace the enter prefix
dial number.
Dial Command SMS Command Default
320xy#... TIERESULTx y Not preset from production
Where x is number of position 1 to 5.
Where y is up to 16 digits of result dial selection.
Connection Mode
Mode 0 (substitution dial) will replace the enter prefix dial of short-code selection,
coming to the gateway, with phone number of the result dial selection and will
complete the whole selection with the rest of the short-code selection. This mode
is suitable for directing phone calls to PBX’s with ISDN dialing-in.
Mode 1 (additional dial) will replace the enter prefix dial of short-code selection,
coming to the gateway, with phone number of the result dial selection and after
the phone call is answered will carry out dialing of the rest of the short-code
selection using DTMF pulses. This mode is suitable for directing phone calls to
PBX’s with DISA dialing-in.
Dial Command SMS Command Default
330xy#... TIEMODEx y Preset from production to 0
Where x is number of position 1 to 5.
Where y= 0 for mode 0 and y=1 for mode 1.
5.22. RESET of Gate and Time Counters
It is possible to carry out remote RESET of GB 102 using SMS message. Action
is equivalent to switch-on of charging tm. start-up of program, switch-off and on of
GSM module and login in network.
Dial Command SMS Command Default
RESET
SMS command message should look like this: XXpppp RESET (see Chapter 4.2.)