23
MENU FUNCTIONS
NIGHT VISION
Camera Continued
Camera
Your PTZ camera is equipped with invisible IR (Infrared) LEDs which keep your baby's
room dark but allow you to see with perfect clarity. The LEDs are located on the front
of the camera and allow you to see up to 12 ft in complete darkness so you can check
on your baby at any time of night. Night Vision image appears in black and white.
Night
Vision will activate automatically
when the light sensor on the camera detects the light
levels in the room are too low or you can manually turn it on at any time from the Settings
menu. This can be a good feature at dusk or dawn, when the room may be too bright for
night vision to turn on but too dark to see clearly without it.
Night Vision
Turn on Manual Night Vision
1.
Open the
Menu
, choose
Camera
, and press
OK
.
2. Choose
Night Vision
and press
OK
.
3.
Choose the desired
Camera
and press
OK
.
4.
Open the
Night Vision Settings
, option and press
OK
to select.
• Auto:
night vision will turn on automatically when
light level is low.
• On:
night vision will remain on
12:45
am
22°c
Night Vision Settings
AUTO
ON
5.
Open this menu again and select
Auto
to turn off
manual Night Vision.
Night Vision will show on the Active Camera, if that
camera is selected for Split Screen, in Quad Screen, and in
Sequence Mode. If you are turning Night Vision on select a
camera that will be viewed in these option.
