Software
Leuze
electronic
24
ODS 96
Leuze electronic
This area is inaccessible with ODS 96 devices without analog output.
Figure 6.5: Programming window ODS 96 with two switching outputs
Switching outputs
Depending on the ODS 96 type, values for either one or two switching out-
puts can be set. The adjustable parameters have the following meaning:
• Light switching: in case an object is inside the area defined under
"from - to", the switching output is active (high).
• Dark switching: in case an object is inside the area defined under "from
- to", the switching output is inactive.
• Hysteresis: Expansion of the switching range for switching off. For
switching on, the set switching points remain always valid.
Adjustable value range:
• 0 .. 300 mm LED device
• 0 .. 1000 mm laser device
It is possible to adjust values which exceed the limits of the measure-
ment ranges. A regulation happens at the following values:
LED device
Laser device
Lower range
75 mm
170 mm
Upper range
800 mm
2200 mm
Table 5: Regulation values of the sensors
