Leuze electronic GmbH + Co. KG
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
(I)GS 63B… - 02
[email protected] • www.leuze.com
Order guide
The sensors listed here are preferred types; current information at www.leuze.com.
Part number code
ALC (Auto Level Control) function ((I)GS63B/….3…)
In each teach event, the current signal values in the sensor are digitally determined, resulting in the optimum switching threshold being
calculated for maximum function reserve. All values are permanently saved, retaining their validity as long as the dynamic parameters of
the system remain unchanged and the material is not changed.
Signal changes can result each time the roll is changed, even with labels that are apparently the same. This is caused, for example, by
material variations (transmission factor, homogeneity …) or changes of the dynamic system parameters (e.g. tape tension, middle position
of the labels, jitter, etc.) that can have a negative affect on the function reserve of the sensor.
With the ALC function, the sensor now automatically corrects the switching threshold in such a way that the maximum function reserve is
always available during operation - the sensor works absolutely reliably and free of errors.
The teach event only needs to be repeated if the sensor does not switch following a change of material.
Designation
Part no.
Comment
Without warning output
GS63B/6.3-S8
50128004
GS63B/6D.3-S8
50128008
GS63B/6.3-S8V
50128005
GS63B/6D.3-S8V
50128009
GS63B/66.3-S8
50143910
2 antivalent switching outputs
GS63B/6.3,200-S8
50129248
With warning output
IGS63B/6.3
50128013
IGS63B/6.3,200-S12
50128014
IGS63B/6D.3,200-S12
50128015
SET IGS63B/6D.3,200-S12
50128016
Included with BT-GS6X.L
SET IGS63B/6D.3BTH,200-S12
50128017
Mounted with BT-GS6X.H
Potentiometer
GS63B/6
50128001
GS63B/6,200-S12
50128002
GS63B/6.01,200-S12
50128003
Mounted with BT-GS6X.L
GS63B/6-S8
50128011
GS63B/6-S8V
50128012
GS63B/6D
50128006
GS63B/6D-S8
50128010
GS63B/6D,200-S12
50128007
GS63B/6D,200-S8
50131604
I G S
6 3 B / 6 D . 3 - S 8 V
Warning function
I
Sensor has warning output
Operating principle
GS
Fork sensor, optical
Series
63B
High quality series with metal housing, B generation
Output function
/6
Push-pull output: PNP signal in the label gap, NPN signal on the label
/66
2 push-pull outputs:
Pin 4: PNP signal in the label gap, NPN signal on the label
Pin 2: PNP signal on the label, NPN signal in the label gap
/6D
Push-pull output: PNP signal on the label, NPN signal in the label gap
/66D
2 push-pull outputs:
Pin 4: PNP signal on the label, NPN signal in the label gap
Pin 2: PNP signal in the label gap, NPN signal on the label
Setting
N/A
Potentiometer adjustment
.3
Teach button on the device
Electrical connection
N/A
Device with cable, standard length 2000mm, cable outlet at 45°
-S8
M8 connector, 4-pin, horizontal plug outlet
-S8V
M8 connector, 4-pin, vertical plug outlet
,200-S12 200mm cable with M12 connector, 5-pin, cable outlet at 45°
,200-S8
200mm cable with M8 connector, 4-pin, cable outlet at 45°
(I)GS 63B
Fork photoelectric sensor
