Leuze DCR 50, Руководство по эксплуатации

Страница: 54 / 92

Configuration control
Leuze electronic DCR 50 54
Code Description Command Format Op-
tions Default Notes/Examples
Set Imager Exposure SC SP S/P/R/
G EX This defines the imager exposure in
Bypass AGC Mode.
Example : SCSPSEX50
Set Imager Gain SC SP S/P/R/
G GN This defines the imager gain in Bypass
AGC Mode.
Example : SCSPSGN50
Set Imager Illumination SC SP S/P/R/
G IL This defines the Imager Illumination in
Bypass AGC Mode.
Example : SCSPSIL50
Set Fixed percent (percent) SC SP S/P/R/
G FP Set Fixed percent
Valid Range: 0 to 100
Example:
8.2.12 Setup AGC parameters
Code Description Command Format Op-
tions De-
fault Notes/Examples
Get All AGC Parameters AG AG G Returns all AGC parameters values in
an XML element.
Example : AGAGG
Max AGC Brightness in Mo-
tion Detect (percent) AG CR S/P/R/
G MB 100 Sets the maximum brightness used wile
in Motion Detect mode.
An integer from 0 to 100 representing a
percentage of overall maximum bright-
ness.
Valid Range: 0 to 100
Example : AGCRPMB50
AGC Timing AG TM S/P/R/
G HQ 360 AGC High Quality time limit
Valid Range:
Example : AGTMSHQ360
AGC Medium Quality time
limit AG TM S/P/R/
G MQ 320 AGC Medium Quality time limit
Valid Range:
Example : AGTMSMQ320
AGC Low Quality time limit AG TM S/P/R/
G LQ 120 AGC Low Quality time limit
Valid Range:
Example : AGTMSLQ120
Timeout multiplier (FP24_8) AG TM S/P/R/
G MT 0x100 Timeout multiplier (FP24_8)
Valid Range:
Example : AGTMS