Leuze DCR 50, Руководство по эксплуатации

Страница: 46 / 92

Configuration control
Leuze electronic DCR 50 46
Code Description Command Format Op-
tions De-
fault Notes/Examples
FOI Zoom CD OP S/P/R/
G ZR 0 0 Disable FOI Zoom
Example: CDOPSZR0
1 Enable FOI Zoom
Example: CDOPSZR1
Increases the FOI resolution to robustly
decode small barcodes when FOI is set
to sub-region of the entire FOI. For
faster speed, set FOI width * FOI height
< 320 * 480.
Enhance Contrast CD OP S/P/R/
G EC 0 0 Disable
Example: CDOPSEC0
1 Enable
Example: CDOPSEC1
Enhances image contrast before decod-
ing
Prefix Decode Results with
AIM Symbology Identifiers CD OP S/P/R/
G PA 0 0 Don’t prefix with AIM identifier
Example : CDOPSPA0
1 Prefix decode result with ISO/
IEC standard 15424/AIM
Example : CDOPSPA1
Security Level
(Decoder P_SECU-
RITY_LEVEL)
CD OP S/P/R/
G SE See decoder API
1D Barcode Aggressiveness CD OP S/P/R/
G SE 0 0 Most Aggressive
Example: CDOPSSE0
1 Less Aggressive for poorly
printed 1D barcodes.
Example: CDOPSSE1
2 Least Aggressive for poorly
printed 1D barcodes.
Example: CDOPSSE2
11 Less Aggressive for 1D barcodes
with low module size
Example: CDOPSSE11
12 Least Aggressive for 1D bar-
codes with low module size
Example: CDOPSSE12
Decode Attempt Time CD OP S/P/R/
G AT 0 Attempt Time (Same as sticky time in
CR8x)
Example: CDOPSAT0
Stop Decoding on Duplicate CD OP S/P/R/
G SD 0 Instructs the decoder to stop looking for
decodes in the current image when a
duplicate is found.
Prefix with AIM Identifier CD OP S/P/R/
G PA 0 Prefixes the decode data with the 3-
character AIM identifier