Leuze DCR 50, Руководство по эксплуатации

Страница: 49 / 92

Configuration control
Leuze electronic DCR 50 49
Code Description Command Format Op-
tions De-
fault Notes/Examples
Public sector & validation
configuration string CD OP S/P/R/
G FP Validation & public sector configuration
string
Example : CDOPSFP
Stand Detection CD ST S/P/R/
G SE 1 0 Disable
Example : CDSTSSE0
1 Enable
Example : CDSTSSE1
Detects when the reader has been
placed in a stand that contains a trigger
magnet and change to Motion Detection
mode.
CD ST S/P/R/
G SD CDSTSSD100
Stand detect duplicate barcode block
delay in ms
8.2.6 Power mode parameters
Code Description Command Format Op-
tions De-
fault Notes/Examples
Get All Power Management
Parameters PM PM G Returns all power management parame-
ter values in an XML element.
Example : PMPMG
Standby Mode Timer PM SB S/P/R/
G EN 0 0 Disable Standby Mode Timer
Example : PMSBSEN0
1 Enable Standby Mode Timer
Example : PMSBSEN1
Standby Mode Timer Delay
(ms) PM SB S/P/R/
G VA 5000 If Standby Mode Timer is enabled, the
device will go into Standby Mode after
this timer has expired.
Valid Range:
Example : PMSBSVA2000
Sleep Mode Timer PM SM S/P/R/
G EN 0 0 Disable Sleep Mode Timer
Example : PMSMSEN0
1 Enable Sleep Mode Timer
Example : PMSMSEN1
The Standby Mode Timer must be en-
abled for the device to go into Sleep
Mode.
Sleep Mode Timer Delay
(ms) PM SM S/P/R/
G VA 3600 If both Standby Mode Timer and Sleep
Mode Timer are enabled, the device will
go into Sleep Mode after this timer has
expired.
Valid Range:
Example : PMSMSVA3600