Leuze electronic OGS 600 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 103

background image

Safety

Leuze electronic

OGS 600

7

TNT

35/7-2

4

V

In particular, use of the device is not permitted in the following cases:

• in rooms with explosive atmospheres
• as stand-alone safety component in accordance with the machinery directive

1)

• for medical purposes

2.3

Competent persons

Connection, mounting, commissioning and adjustment of the device must only be carried
out by competent persons.

Prerequisites for competent persons:

• They have a suitable technical education.
• They are familiar with the rules and regulations for occupational safety and safety at

work.

• They are familiar with the original operating instructions of the device.
• They have been instructed by the responsible person on the mounting and operation

of the device.

Certified electricians

Electrical work must be carried out by a certified electrician.

Due to their technical training, knowledge and experience as well as their familiarity with
relevant standards and regulations, certified electricians are able to perform work on elec-
trical systems and independently detect possible dangers.

In Germany, certified electricians must fulfill the requirements of accident-prevention regu-
lations BGV A3 (e.g. electrician foreman). In other countries, there are respective regula-
tions that must be observed.

2.4

Exemption of liability

Leuze electronic GmbH + Co. KG is not liable in the following cases:

• The device is not being used properly.
• Reasonably foreseeable misuse is not taken into account.
• Mounting and electrical connection are not properly performed.
• Changes (e.g., constructional) are made to the device.

1)

Use as a safety-related component within a safety function is not permissible.

NOTE

Do not modify or otherwise interfere with the device!



Do not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in any way.



The device must not be opened. There are no user-serviceable parts inside.



Repairs must only be performed by Leuze electronic GmbH + Co. KG.

«
...
7
8
9
10
11
...
»

Содержание OGS 600








































































































Отзывы:

Нет отзывов

Похожие инструкции для OGS 600

Бренд: Easymount Страницы: 2

Бренд: PASCO Страницы: 5

Бренд: PASCO Страницы: 4

Бренд: PASCO Страницы: 8

Бренд: PASCO Страницы: 4

Бренд: PASCO Страницы: 12

Бренд: PASCO Страницы: 5

Бренд: PASCO Страницы: 3

Бренд: Abicor Binzel Страницы: 44

Southern Series

Бренд: Warmington Страницы: 2

Бренд: FABBRI PORTATUTTO Страницы: 2

Zeus F745-VTX STACK

Бренд: HGLRC Страницы: 19

Бренд: R&S Страницы: 44

Бренд: NuTone Страницы: 6

Бренд: Bogen Страницы: 1

Dodge Charger TufBox

Бренд: TUFLOC Страницы: 6

Бренд: Ikelite Страницы: 28

Бренд: Yakima Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды