manualshive.com logo in svg

Leuze electronic MA 248i, Оригинальная инструкция по эксплуатации, Страница: 74 / 108

Поделиться
Скачать
Leuze electronic MA 248i Скачать руководство пользователя страница 74

Commissioning and configuration

72

MA 248

i

Leuze electronic

12.4.1

Modular structure of the parameter

The PROFINET-IO functionality of the device is defined via parameter sets which are clus-
tered in modules. The modules are included in a XML-based GSD file, which is supplied as
an integral part of the device. By using a user-specific project tool, such as, e.g., Simatic
Manager for the Siemens programmable logic control, the required modules are integrated
into a project during commissioning and its settings and parameters are adjusted accord-
ingly. These modules are provided by the GSD file.

Notice!

All input and output modules described in this documentation are described from the con-
troller's perspective:

- Input data arrives at the controller.
- Output data is sent out by the controller.

Detailed information on how to prepare the control and the GSD file may be found in chapter
"Configuration steps for a Siemens Simatic S7 control" on page 65.

For the default settings of the MA 248

i

, please refer to the following module descriptions.

Notice!

Please note that the set data is overwritten by the PLC!
Some controls make available a so-called "universal module". This module must not be
activated for the MA 248

i

!

From the perspective of the device, a distinction is made between PROFINET-IO parameters
and internal parameters. PROFINET-IO parameters are all parameters that can be changed
via the PROFINET-IO and are described in the following modules. Internal parameters, on
the other hand, can only be changed via a service interface and retain their value even
following a PROFINET-IO configuration.

During the configuration phase, the MA 248

i

 receives parameter telegrams from the

controller (master). Before this is evaluated and the respective parameter values are set, all
PROFINET-IO parameters are reset to default values. This ensures that the parameters of
modules that are not selected are set to the default values.

Содержание MA 248i













































































































Отзывы:

Нет отзывов