PROFINET
Leuze electronic
DCR 248i
58
1
2
3
1 Device name
2 [Search] button
3
MAC address
selection dialog
Fig. 10.2:
Assigning the device names to the configured IO devices
Ä
Assign the IP address to the MAC address (individual device name).
• At this point, assign another IP address (suggested by the control), a subnet mask and, if required, a
router address, and assign this data to the named participant (device name).
1
2
3
1 Ethernet participant
2 Set IP configuration
3 Device name
Fig. 10.3:
MAC address – IP address – individual device name
• From now on, and when programming, only the unique device name (max. 240 characters) is used.
Check device name
Ä
After completing the configuration phase, check the device names that have been assigned.
NOTICE
Assign unique device name!
Ä
Ensure that the device names are unique and that all participants are located in the same
subnet.
