Leuze electronic DCR 248i Скачать руководство пользователя страница 36

Страница: 36 / 115

Electrical connection

Leuze electronic

DCR 248i

NOTICE

SWIO3 and SWIO4 as switching output!

Do not operate pins 2 and 4 as switching output if sensors which function as switching input
are also connected to these pins.

If, for example, the inverted sensor output is connected to pin 2, and pin 2 of the code
reader is, at the same time, configured as a switching output (and not as a switching in-
put), the switching output malfunctions.

RS 232/RS 422 interface

The RS 232/RS 422 interface is used primarily for outputting the read and decoded code contents of the
activated code types.

7.3

HOST - Host input / Ethernet / PROFINET

4-pin, M12 socket (D-coded) for connecting to HOST.

Fig. 7.5:

HOST connection

Tab. 7.2:

HOST pin assignment

Pin/terminal

Designation

Assignment

TD+

Transmit Data +

RD+

Receive Data +

TD-

Transmit Data -

RD-

Receive Data -

Thread (M12
socket)

FE (functional earth)

Connection cable shield.

The shield of the connection cable is on the thread of the
M12 socket.

NOTICE

Use ready-made cables!

If possible, use the ready-made cables from Leuze electronic (see chapter 16.4 "Cables ac-
cessories").

7.4

Ethernet star topology

The code reader is operated as a "stand-alone" single device in an Ethernet star topology with individual IP
address.

• The code reader is designed as an Ethernet device with a standard baud rate of 10/100 Mbit.

• A fixed MAC address is assigned to each device by the manufacturer; this address cannot be changed.

• The device automatically supports the transmission rates of 10 Mbit/s (10BASE T) and 100 Mbit/s

(10BASE TX), as well as auto-negotiation and auto-crossover.

• The device supports the following protocols and services:

• TCP / IP (client/server)

• UDP

• ARP

• PING

Содержание DCR 248i




















































































































Результаты поиска

Содержание DCR 248i

Отзывы:

Бренды по названию

Популярные бренды

Leuze electronic DCR 248i, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание DCR 248i

Отзывы:

Бренды по названию

Популярные бренды