background image

Mounting

Leuze electronic

DCR 248i

28

0 x 0

20 x 15

40 x 30

60 x 45

80 x 60

100 x 75

120 x 90

140 x 105

0

50

100

150

200

250

300

350

1

3

4

2

1

Camera distance [mm]

2

Reading field: width x height [mm]

3

N1-optics, M1-optics

4

F-optics

Fig. 6.6: 

Relationship between camera distance and reading field size

6.2

Mounting the code reader

NOTICE

Information on mounting the code reader can also be found in document "Quick Start Guide
DCR 200i".

6.2.1

Mounting with M4 fastening screws

Ä

Mount the device on the system with M4 fastening screws (not included in delivery contents).

ð

Max. tightening torque of the fastening screws: 1.4 Nm

ð

Location and thread depth of the mounting thread: see chapter 15.3 "Dimensioned drawings"

6.2.2

Mounting with the BTU 320M-D12 mounting system

Mounting with a BTU 320M-D12 mounting system is intended for 12-mm rod mounting. For ordering infor-
mation, see chapter 16.5 "Other accessories".

Ä

Mount the mounting system on the rod with the clamp profile (system-side).

Ä

Mount the device to the mounting system with M4 fastening screws.

ð

Max. tightening torque of the fastening screws: 1.4 Nm

ð

Location and thread depth of the mounting thread: see chapter 15.3 "Dimensioned drawings"

Содержание DCR 248i




















































































































Отзывы: