Configuration and diagnostic software - Sensor Studio
Leuze electronic
CR 55
20
6.5.2 Decode tab
Figure 6.4: Decode tab
Figure 6.5: Standard settings for the Properties window (Symbology Properties) – Decode tab
Code table
(DECODER OVER
-
VIEW)
Here, the codes which are to be decoded are set. We recommend enabling only
the code types which are to actually be read with the corresponding element num
-
bers. Codes which are not enabled are not decoded!
Properties
(Symbologies)
Use the […] button to the right of the given code to select the code-specific set
-
tings.
Alternatively, the property settings can be selected directly via the navigation tree
under the [Decode] button.
The properties can be individually set for each code type.
