Leuze electronic CR 55 Series Скачать руководство пользователя

Страница: 14 / 34

Configuration and diagnostic software - Sensor Studio

Leuze electronic

CR 55

Configuration and diagnostic software -

Sensor Studio

The

Sensor Studio

configuration software provides a graphical user interface for the operation, configura

tion and diagnosis of the device via the RS 232 interface.
A device that is not connected to the PC can be configured offline.
Configurations can be saved and reopened as projects for transferring back to the device at a later time.

The

Sensor Studio

configuration software is designed according to the FDT/DTM concept:

• You make the individual configuration settings for the bar code reader in the Device Type Manager

(DTM).

• The individual DTM configurations of a project can be called up via the frame application of the Field

Device Tool (FDT).

• Communication DTM for bar code readers:

LeCommInterface

• Device DTM for bar code readers CR 55

Procedure for the installation of the software and hardware:



Install the

Sensor Studio

configuration software on the PC.



Install the communication and device DTM.
Communication and device DTM are included in the

LeAnalysisCollectionSetup

installation package.



Create CR 55-DTM in the project tree of the

Sensor Studio

FDT frame.



Connect bar code reader to PC; see chapter 5.4



Activate service interface on bar code reader; see chapter 7.3.2

6.1

System requirements

To use the

Sensor Studio

configuration software, you need a PC or laptop with the following specifications:

Table 6.1:

System requirements for Sensor Studio

installation

Only use the

Sensor Studio

configuration software for products manufactured by

Leuze electronic.

The

Sensor Studio

configuration software is offered in the following languages: German, Eng

lish, French, Italian and Spanish.

The FDT frame application of the

Sensor Studio

supports all languages; all languages may not

be supported in the device DTM (Device Type Manager).

Operating system

Windows XP or higher (32 bit, 64 bit)

Windows Vista

Windows 7

Windows 8

Computer

• Processor type: 1 GHz or higher

• Serial COM interface

• CD drive

• Main memory (RAM): at least 64 MB

• Keyboard and mouse or touchpad

Graphics card

At least 1024 x 768 pixels

Required hard disk

capacity for

Sensor Studio

and

communication DTM

35 MB

Содержание CR 55 Series



































Результаты поиска

Содержание CR 55 Series

Отзывы:

Похожие инструкции для CR 55 Series

Бренды по названию

Популярные бренды

Leuze electronic CR 55 Series, Руководство по эксплуатации

Результаты поиска

Содержание CR 55 Series

Отзывы:

Похожие инструкции для CR 55 Series

Бренды по названию

Популярные бренды