Configuration and diagnostic software - Sensor Studio
Leuze electronic
CR 55
17
Figure 6.1: Device selection for bar code reader CR 55
Select CR 55 in the device selection and click on [Next].
The device manager (DTM) of the connected CR 55 starts with the offline view for the
Sensor Studio
configuration project.
Establish the online connection to the connected CR 55.
In the
Sensor Studio
FDT frame, click on the [Establish connection with device] button (
).
In the
Sensor Studio
FDT frame, click on the [Upload parameters to device] button (
).
The current configuration data is displayed in the device manager (DTM).
