Leuze electronic BCL 21, Техническое описание

Страница: 71 / 86

Leuze electronic
Online commands
Leuze electronic BCL 21/22 69
TNT 35/7-24V
Teach-In
Notice!
With this function, only code types are recognised that are identified using the autoConfig
function or which were set in the set-up.
!
After each reading via an ’RTx’ command, explicitly switch off the function again since
failure to do so will interfere with other commands as well as prevent execution of a new
’RTx’ command.
Command ’RT’
Description
This command enables a reference code to be defined quickly by read-
ing an example label.
Parameter
’RTy’
y
: Function
’1’ defines reference code 1
’2’ defines reference code 2 …
’9’ defines reference code 9
’+’ activates the definition of reference code 1 up to the value of Param-
eter no_of_labels
’-’ Exit the Teach-In process
Acknowledge-
ment
The BCL first responds with the command ’RS’ and corresponding sta-
tus (see command RS). After a barcode has been read, it sends the
result in the following format:
’RCyvxxzzzzz’
y
, v, x and z are placeholders (variables) for the actual input.
y : def. reference code No.
’1’ (Code 1) …
’9’ (Code 9)
v : Storage location for reference code
’0’ RAM+EEPROM,
’3’ RAM only
xx def. Code type (see command ’CA’)
z def. Code information (1 … 63 characters)