Leupold RX-1000i, Руководство по эксплуатации

Страница: 14 / 36

12
To initiate rangefinder setup mode, press the POWER button to activate the
unit, then press and hold the MODE button to enter the Quick Set Menu
TM
.
To manipulate a function, press the MODE button until that function is flashing,
then use the POWER button to change the setting. If this is the last function
to be changed, you can allow the rangefinder to sit idle for 20 seconds which
will cause an automatic power-off, saving all selections. If additional functions
require manipulation, simply press MODE to continue through the Quick
Set Menu. Pressing and holding MODE for 1 second at any time will save all
changes, exit the Quick Set Menu, and prepare the rangefinder for immediate
use.
To reset your RX-1000 i to factory settings, Press POWER to activate the
rangefinder, press and hold MODE, then press and hold POWER. A 10-second
countdown timer will appear; factory reset will occur after 0 has been reached.
Note:
Activating certain modes automatically disables other modes. For example
activating the yards mode will automatically deactivate the meters mode.