26
FUNCTION 3: DISPLAY INTENSITY
This mode is used to adjust the brightness of the display,
allowing you to match the intensity to current conditions.
Your RX-1000
i
has three display intensity settings; low,
medium, and high.
Navigate through the Quick Set Menu by pressing the MODE
button until “DISP” is shown in the lower display. Press and
release the POWER button to toggle between high, medium, and low.
FUNCTION 4: UNIT OUTPUT
This mode is used to choose between yards and meters as
the preferred unit of measure. To choose between yards and
meters, navigate through the Quick Set Menu by pressing the
MODE button until “Unit” is shown in the lower display. Press
and release the POWER button to alternate between yards
and meters.
Units set to Yards (YD)
Содержание RX-1000i
Страница 1: ...RX 1000i COMPACT DIGITAL LASER RANGEFINDER Complete Operation Manual TM ...
Страница 13: ...11 QUICK SET MENU Operation Display shown with all possible modes visible ...
Страница 20: ...18 TBR TRUE BALLISTIC RANGE RIFLE ...
Страница 21: ...19 TBR TRUE BALLISTIC RANGE ARCHERY 40Yards lineofsight ata40 decline ...