Leonics NB 1K25 Скачать руководство пользователя страница 4

INTRODUCTION

2.1 General

LEONICS NB-series/NPB-series UPS is a True On-Line Double conversion

uninterruptible power supply which is the highest quality power protection system to

protect against all utility power problems.  It is designed for power sensitive equipments

or critical applications such as computers, communication equipments, medical

instruments, electronic measurement equipments, scientific equipments, and etc.

2.2  LEONICS NB-series and NBP-series UPS operation

- 3 -

Battery can be recycled and needs proper elimination.  It consists of

lead  which harms to our environment and health.  Please return the

battery to us or our service center.

1.3.3 Do not disassemble batteries. They contains poisonous electrolyte which is

                       harmful to your skin and eyes.

1.3.4 When replacing a battery, use tools with insulated handles and remove any

                       watch, rings or other metal objects that you wear in order to avoid electric

                       shock.

1.3.5 Replace batteries with the same type and rating and follow the proper

                       battery replacement procedure.

Vocabulary

          

  Load :

Any equipment which is plugged into the UPS and gets power from

               the UPS such as a computer, printer, fax machine or modem.

  UPS :            NB-Series and NBP-series UPS

            VA

:            The unit of UPS power rating  showing its capacity.

2.2.1 When utility power and loads are normal

Above diagram shows how UPS works when utility power (AC line) is

normal and UPS has less than 100% load. UPS converts utility power from

alternative current (AC) to direct current (DC) at RECTIFIER. Some of the DC

power flow to charge battery to be backup power and the rest flow directly to

INVERTER to invert power to high quality and stable AC power. Then, supply

to load.

Note:

The input circuit breaker is available in NB 2K25, NBP Series only.

2.2.2 When utility power is normal but overload

Above diagram shows how UPS works when utility power is normal

and UPS has more than 100% load.  UPS converts utility power at RECTIFIER to

charge battery only.  The power supplied to load is from utility line.

- 4 -

Содержание NB 1K25














Отзывы: