Lenze IE2 m550-H, Инструкции по монтажу и включению

Страница: 17 / 56

Mechanical installation
Important notes
•
Install the product according to the information in the chapter "Standards and operating
conditions".
4
Standards and operating conditions
^
42
•
The technical data and the data regarding the supply conditions can be found on the
nameplate and in this documentation.
•
Ambient media − especially chemically aggressive ones − may damage shaft sealing rings,
lacquers and plastics.
•
Lenze offers special surface and corrosion protection in this case.
Transport
•
Ensure appropriate handling.
•
Make sure that all component parts are securely mounted. Secure or remove loose
component parts.
•
Only use safely fixed transport aids (e.g., eye bolts or support plates).
•
Do not damage any components during transport.
•
Avoid electrostatic discharges on electronic components and contacts.
•
Avoid impacts.
•
Check the carrying capacity of the hoists and load handling devices. The weights can be
found in the shipping documents.
•
Secure the load against tipping and falling down.
•
Standing beneath suspended loads is prohibited.
The transport weights can be found in the shipping documents!
Preparation
•
Protect shaft sealing rings from contact with solvents.
•
Remove protection covers from shafts.
•
Thoroughly remove anticorrosion agents from the shaft and from flange faces.
•
Draw the transmission elements onto the output shaft only by using the centering thread.
•
Align the output shaft and transmission elements exactly to avoid tensions.
•
Mount belt pulleys, sprockets, or gear wheels as close as possible to the shaft shoulder in
order to keep the bending load of the shaft and the bearing forces at a minimum level.
•
Tighten all screw connections with the specified torques and secure them with standard
screw locking adhesive.
•
Check paint for damage and repair professionally.
Thread M3 M4 M5 M6 M8 M10 M12 M16 M20 M24 M27 M30
Strength Tightening torque Nm ±10 %
4.8 Nm 0.7 1.4 2.8 4.8 12 23 − − − − − −
8.8
Nm 1.3 3.0 5.9 10.1 24.6 48 84 206 415 714 1050 1428
10.9 Nm 1.9 4.6 8.6 14.9 36.1 71 123 302 592 1017 1496 2033
Mechanical installation
Important notes
17