Lenze i950-Cabinet, Инструкции по монтажу и включению

Страница: 145 / 154

Saving the parameter settings
During operation with the CiA 402 device profile, no settings are saved. The settings are transmitted when
the master control is started. If applications are used, the SD card with the licence data also serves as
storage medium.
The active application is displayed in the parameter. C2013:001
The application can be modified via the parameter. 0x4000
Save parameter settings with »EASY Starter«
If a parameter setting has been changed with the »EASY Starter« but not yet saved in the memory medium
with mains failure protection, the status line of the »EASY Starter« displays the note "The parameter set was
changed".
There are 3 options to save the parameter settings in the user memory of the storage medium:
•
Click the button in the toolbar of the »EASY Starter« .
•
Press the function key F6.
•
Execute the device command "Save user data": = "On / start [1]".
Commissioning
Saving the parameter settings
Save parameter settings with »EASY Starter«
145