Lenze g500 Series, Инструкция по монтажу

Страница: 33 / 44

Commissioning and operation
Important notes
5
33
Lenze ¯ MA 12.0018 ¯ 2.0
5 Commissioning and operation
5.1 Important notes
Stop!
The drive may only be commissioned by skilled personnel!
¯ Before commissioning remove transport locking devices and keep them for later
transports.
¯ Take safety measures prior to any operation:
–
Disconnect the machine from the mains, ensure standstill of the drive system
and avoid any machine movement.
5.2 Before switching on
Please check:
¯ Drive function - machine function assignment
¯ The direction of rotation of the drive shaft
g500−S 2−stage g500−S 3−stage
¯ Does the drive appear undamaged?
¯ Is the mechanical fixing o.k.?
¯ Is the electrical connection correct?
¯ Are all rotating parts and surfaces that may become hot protected against
contact?
¯ For gearboxes with breathing elements:
–
Has the transport locking device been removed?
Stop!
At drive speeds below 200 rpm the amount of lubricant may need to be
increased. Consultation with Lenze is required.