Lenze g500-S, Инструкции по монтажу и включению

Страница: 27 / 72

F E
NOTICE
▶
Independent of the mounting order, the output shaft must be aligned with the machine
shaft.
How to mount the foot to the gearbox:
1
.
Fasten foot to gearbox with 4 screws in "Position F" and 2 screws in "Position E
2
.
Fasten gearbox with foot to machine housing with 4 screws
How to mount the foot to the machine housing:
1
.
Fasten foot to machine housing with 4 screws
2
.
Fasten foot to gearbox with 4 screws in "Position F" and 2 screws in "Position E
How to align the gearbox shaft with the machine shaft:
1
.
Loosen fixing screws "foot on gearbox" and "foot on machine housing" until the foot can
be moved on both the gearbox and the machine housing
2
.
Output shaft aligned with machine shaft
3 .
Tighten the fixing screws "foot on gearbox" and "foot on machine housing"
4
.
Check alignment of gearbox shaft to machine shaft, improve alignment if necessary and
repeat steps 1 to 3
Tightening torques for mounting the foot to the gearbox
Product code Tightening torque
Nm
G5 G50BS122 10
G5 G50BS166 48
Mechanical installation
Mounting
27