BEFORE YOU RIDE:
Before you ride, always check for the following:
Safety Gear
Always wear proper protective gear such as:
•
Approved safety helmet. (Helmet may be legally required by local law or regulation in
your area.)
•
Elbow pads and knees pads
•
Long sleeved shirt, long pants
•
Gloves
•
Lace up shoes with rubber soles.
Brake
Check the brakes for proper function. When lever is squeezed it should slow/stop the rear
wheel without excessive effort. When you apply the brake with the throttle on, the brake
cut off switch should stop the motor. Make sure that the brakes are not rubbing when the
lever is not being squeezed. Do not ride the scooter if the brakes are not functioning
properly.
Throttle
Once the power switch is place in the "ON" position the scooter will move when the throttle
is twisted. Make sure that before throttle is
twisted that you are in an open and safe area to ride, you are balanced on the scooter and
have both hands on the handlebar controls.
Tires
Inspect the wheels for excess wear and replace if necessary.
Frame, Fork and Components
Always carefully inspect your scooter before you ride. Check for cracks, broken worn or
loose components which should be repaired or replaced before you ride.
Battery
Always make sure the power switch is in the "off" position whenever the scooter is not in
use. Never store the product in freezing or below freezing temperatures. These low
temperatures will permanently damage the battery.
WARNING:
Always ensure that you are in a safe open area to ride before you engage the
throttle. Never twist the throttle without being on the scooter in a balanced, ready to ride
position with both hands on the handlebar controls.
Failure to follow these instructions may damage your scooter and void your warranty.
