REPAIR AND MAINTENANCE:
Belt and rear wheel replacement continued
7. Ensure adjustment washers are seated correctly against the frame. After tightening axle nuts with a
13mm wrench check wheel alignment and the tracking of the belt by rotating the wheel counterclockwise
with your hand. Adjustment washers may need to be readjusted to align belt. Refer to the instructions in
the section
adjusting the belt
for further information.
8.
Retighten the brake arm bolt with a Phillips screwdriver & 8mm wrench.
9. Retighten brake cable pinch nut with 10mm wrench. Refer to the instructions in the section
adjusting
the brakes
for further information.
10. Reinstall side covers with a 4mm hex wrench. Do not over tighten bolts.
