REPAIR AND MAINTENANCE:
WARNING:
Turn the power switch "OFF" before conducting any maintenance procedures.
Adjusting the Brakes
Tools required: 10mm wrench
1.
To adjust the brake cable thread clockwise (loosen) or counterclockwise (tighten) the
adjuster barrel on the brake lever. Only tum the barrel in small increments until the
desired adjustment is reached. If brake continues to need further adjustment proceed to
the next step.
2.
If the brake cable is still either too tight or too loose use a 10mm wrench to loosen the
brake cable pinch bolt for further adjustment on the cable. Ensure that the 10mm nut is
securely tightened after the adjustment is made.
WARNING:
The brake could be capable of locking up and skidding the rear wheel if not
applied correctly. Always try and avoid skidding as this could cause you to lose control of the
scooter and will cause damage to the rear tire. Practice using the brake in an unobstructed
open area to become familiar with its function and can make smooth controlled stops.