Lenovo tihnkserver rd330 Скачать руководство пользователя страница 156

Страница: 156 / 198

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Depending on the model, your server might look slightly different from the illustrations in this topic.

To replace a system fan, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 71.

4. Remove the cooling shroud. See “Removing and reinstalling the cooling shroud” on page 75.

5. Reconnect the power cord to the server and the electrical outlet.

6. Locate the failing system fan. The system fan error LED on the system board is lit. See “System board

LEDs” on page 41.

7. Disconnect the power cord from the electrical outlet.

8. Disconnect the cable of the system fan from the system fan connector on the system board. See

“System board components” on page 33 to identify the system fan connector.

9. Lift up the tape of the system fan to remove the system fan out of the chassis.

Figure 91. Removing the system fan

10. Touch the static-protective package that contains the new system fan to any unpainted surface on the

outside of the server. Then, remove the new system fan from the package.

142

ThinkServer RD330 Hardware Maintenance Manual

Содержание tihnkserver rd330







































































































































































































Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды

Lenovo tihnkserver rd330, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды