Lenovo tihnkserver rd330 Скачать руководство пользователя страница 118

Страница: 118 / 198

Notes:

• Use any documentation that comes with the TMM Premium and follow those instructions in addition to

the instructions in this topic.

• If you remove the TMM Premium, the iKVM function for server remote management will be unavailable.

• Depending on the model, your server might look slightly different from the illustration in this topic.

To remove the TMM Premium, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 71.

4. Locate the TMM Premium on the system board, and then lift the TMM Premium straight up to remove

it from the connector.

Figure 54. Removing the TMM Premium

5. If you are instructed to return the old TMM Premium, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

104

ThinkServer RD330 Hardware Maintenance Manual

Содержание tihnkserver rd330







































































































































































































Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды

Lenovo tihnkserver rd330, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание tihnkserver rd330

Отзывы:

Бренды по названию

Популярные бренды