Lenovo ThinkSystem SR635 Скачать руководство пользователя страница 194

Страница: 194 / 246

Figure 168. Hot-swap power supply installation

After installing the power supply:

1. Connect one end of the power cord to the new power supply connector; then, connect the other end of

the power cord into a properly grounded electrical outlet.

2. If the server is powered off, power on the server. Ensure that both the power input LED and power

output LED on the power supply are lit, indicating that the power supply is operating properly.

Heat sink and microprocessor replacement

Use this information to remove and install a heat sink and microprocessor.

Depending on your configuration, refer to the specific topics to remove or install the heat sink and processor:

•  “Remove a heat sink” on page 184
•  “Remove a processor” on page 185
•  “Install a heat sink” on page 188
•  “Install a processor” on page 186

Remove a heat sink

Use this information to remove a heat sink.

Static Sensitive Device

Ground package before opening”

on page 82

Notes:

• It may take some time for the heat sink to cool down after the system has been powered down.
• The heat sink is necessary to maintain proper thermal conditions for the processor. Do not power on the

server with the heat sink removed.

184

ThinkSystem SR635 Maintenance Manual

Содержание ThinkSystem SR635























































































































































































































































Результаты поиска

Содержание ThinkSystem SR635

Отзывы:

Похожие инструкции для ThinkSystem SR635

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR635, Руководство по обслуживанию

Результаты поиска

Содержание ThinkSystem SR635

Отзывы:

Похожие инструкции для ThinkSystem SR635

Бренды по названию

Популярные бренды