Lenovo ThinkSystem NE1032, Руководство по установке

Страница: 54 / 112

54
NE1032 Installation Guide
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1
To install an SFP+ optical transceiver in an SFP+ port slot on the switch, complete
the following steps.
Note:
To avoid damage to the cable or the SFP+ transceiver, do not connect the
cable before you install the transceiver.
1.
Remove the safety cap and pull the locking lever into the down (unlocked)
position.
2.
Insert the transceiver into the slot until it clicks into place. Use minimal pressure
when you insert the transceiver into the slot. Do not use excessive force when you
insert the transceiver or you might damage the transceiver or the slot.
Note:
The transceiver has a mechanical guide key to prevent you from inserting
the transceiver in an incorrect orientation.
3.
Pull up the locking lever to lock the transceiver into place.
4.
Connect the fiber-optic cable following the “Cabling Guidelines” on page 36 .
To remove an SFP+ optical transceiver, disconnect the fiber-optic cable, and pull
down the locking lever to release the transceiver. After you remove the transceiver,
replace the safety cap.