Lenovo ThinkSystem NE1032, Руководство по установке

Страница: 63 / 112

© Copyright Lenovo 2018 Chapter 4: Removing and Replacing Components
63
Removing the NE1032 from a Standard Equipment Rack
This section describes how to remove the NE1032 from a standard 19-inch
equipment rack. For information about removing the switch from other supported
racks, see the appropriate section in this chapter.
To remove the NE1032 from a standard rack, complete the following steps:
1.
Disconnect all external cables.
2.
If the air-duct option has been installed, remove it as described in “Removing the
Air-Duct Option” on page 68 .
3.
Loosen and remove M6 screws, washers, and clip nuts (or cage nuts) to release the
switch unit from the rack.
4.
Slide the switch unit out of the rack.
5.
Loosen and remove the M4 screws attaching the mounting bracket on each side of
the switch.
6.
If replacing the unit with another NE1032, see “Replacing the NE1032” on page 69 .
6
3
4
2
1